Detail
TOMMARYD / LÄKTARE
Swedish design, quality assurance.10 year guarantee. Read about the terms in the guarantee brochure.
You can hang essentials like your bag or headphones within convenient reach on the two hooks on the short side of the table.
Sturdy yet lightweight and easy to move thanks to the hollow tubular steel frame.
For larger workshops or meetings in the office, customise by combining several TOMMARYD tables and re-arrange them as your needs change.
Separate tabletops are available so you can change the look of your table at any time.
The integrated feet prevent scratching on the floor and can be adjusted so the table stands steadily also on uneven surfaces.
Save space when the chairs are not in use. Stack up to 5 chairs with fabric cover, or 7 chairs without the cover.
Lightweight and easy to move or re-arrange according to the needs of your meetings.
Rubber armrests keep the chair in place when you hang it over the tabletop for easy cleaning of floors. The darker colour conceals dirt that comes from frequent use.
The chair cover is easy to remove and wash, helping to keep your conference room looking clean and fresh.
You can also use the chair without the cover. The natural expression of the light birch veneer blends easily with other furniture and colours.
Chair covers have a simple and elegant expression that is easy to place in any conference room. Keep a few extra covers at hand for quick and easy updates when needed.
The covers are soft and comfy, made from 90% recycled polyester. Available in several colours for an easy match with the other furniture in the room.
Armrests provide support for the upper part of your forearms and reduce strain on the back and shoulders during long meetings.
The lumbar support helps maintain the correct posture while sitting which reduces strain on muscles on your lower back.
The soft plate underneath the chair seat prevents scratching on the seat surface when the chairs are stacked.
Create a colour-coordinated office. Use chair covers with different colours for different meeting and work areas.
LÄKTARE conference chair pairs up perfectly with LÅNGFJÄLL conference chair and HATTEFJÄLL office chair.
Shorter armrests allow you to sit closer to the table for a better posture. Also, you do not have to push it out as far when getting up from the chair.
Rubber chair feet protect the floor and reduce noise from moving chairs.
Please refer to packaging label for country of origin
Seats 4.
Only recommended for indoor use.
To minimise the risk of stains and marks, wipe off spills like liquids and grease with a cloth straight away.
This table has been tested for general, non-domestic use and meets the requirements for safety, durability and stability set forth in the following standard: EN 15372 and ANSI/BIFMA X:5.5.
This chair has been tested for public use and meets the requirements for safety, durability and stability set forth in the following standards: EN 16139-Level 1 and ANSI/BIFMA x5.1
2 hooks included.
- Product dimensionsLength130 cmWidth70 cmHeight75 cmPackaging infoThis product comes as 14 packagesTOMMARYDtable top604.160.20Height3 cmLength137 cmNet weight14.33 kgVolume26.2 lWeight15.53 kgWidth71 cmpackage quantity1TOMMARYDunderframe304.298.11Height9 cmLength148 cmNet weight8.75 kgVolume14.0 lWeight9.30 kgWidth11 cmpackage quantity1LÄKTAREchair cover105.279.97Height6 cmLength36 cmNet weight0.63 kgVolume4.6 lWeight0.79 kgWidth24 cmpackage quantity4LÄKTAREseat shell005.622.36Height43 cmLength46 cmNet weight2.27 kgVolume89.0 lWeight2.42 kgWidth45 cmpackage quantity4LÄKTAREunderframe for chair with armrests405.280.71Height50 cmLength66 cmNet weight3.12 kgVolume181.5 lWeight3.40 kgWidth55 cmpackage quantity4
- Care instructionsFor maximum quality, re-tighten the screws when necessary.TableWipe clean with a cloth dampened in a mild cleaner.Wipe dry with a clean cloth.Environment and materialsTable topParticleboard, Laminate, Plastic edging, LaminateUnderframeBasematerial/ Leg:Steel, Epoxy/polyester powder coatingUnderframeInside leg/ Inside frame:SteelChair coverFabric:100% polyester (min. 90% recycled)Chair coverBack fabric:100 % polyester (100% recycled)Chair coverFilling:100% polyester (min. 80% recycled)Chair coverHook and loop fastener:100% nylonChair coverElastic band:50% polypropylene, 50% rubberSeat shellSeat shell:Layer-glued wood veneer, Birch veneer, Tinted clear lacquer, Clear acrylic lacquerSeat shellHook and loop fastener:100% nylonSeat shellSpacer:Plywood, Tinted clear lacquerUnderframe for chair with armrestsFrame:Steel, Epoxy/polyester powder coatingUnderframe for chair with armrestsCover:Polypropylene plastic (min. 20% recycled)Underframe for chair with armrestsFoot:Polyamide plastic, Synthetic rubber
- Item #Assembly instructions304.298.11TOMMARYD underframe304.298.11TOMMARYD underframe105.279.97LÄKTARE chair cover005.622.36LÄKTARE seat shellItem #Related documents604.160.20TOMMARYD table top304.298.11TOMMARYD underframe
TOMMARYD / LÄKTARE
conference table and chairs, light grey light beige/white, 130x70 cm
There are 0 Click &Collect stores near the current address, which can be selected at the time of checkout
After selecting a store, you'll be able to check its stock and the item's shelf location.