Detail
Please refer to packaging label for country of origin
This chair has been tested for home use and meets the requirements for durability and safety, set forth in the following standards: EN 12520 and EN 1022.
The cover has a lightfastness level of 5 (the ability to resist colour fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.
This cover's ability to resist abrasion has been tested to handle 20,000 cycles. A cover that withstands 15,000 cycles or more is suitable for furniture that should withstand everyday use in the home.
This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 110 kg.
4 plastic feet included to protect the floor against scratches.
Only recommended for indoor use.
Seats 4.
Possible to separate for recycling or energy recovery if available in your community.
The tabletop is split in half, making transportation easier with a more compact package.
A bit screwdriver is required to assemble this table, sold separately as a part of TRIXIG 15-piece toolset.
To prevent surface scratches, complete with TRIXIG stick-on floor protectors, sold separately.
Extra covers for BERGMUND chair are available in many different models, colours and materials, sold separately.
Removable washable cover.
- Product dimensionsTable diameter120 cmTable height75 cmChair width52 cmChair depth59 cmChair height95 cmPackaging infoThis product comes as 10 packagesNÄSINGEtable705.875.30Height5 cmLength92 cmNet weight7.33 kgVolume17.1 lWeight8.00 kgWidth35 cmpackage quantity1Height5 cmLength124 cmNet weight16.34 kgVolume37.8 lWeight17.55 kgWidth68 cmpackage quantity1BERGMUNDchair cover504.862.02Height4 cmLength21 cmNet weight0.39 kgVolume1.3 lWeight0.43 kgWidth18 cmpackage quantity4BERGMUNDchair frame604.001.37Height19 cmLength61 cmNet weight6.95 kgVolume56.4 lWeight8.15 kgWidth50 cmpackage quantity4
- Care instructionsTableWipe clean with a cloth dampened in a mild cleaner.Wipe dry with a clean cloth.For increased stability, re-tighten the screws about two weeks after assembly and when necessary.Frame, removable coverVacuum clean.Wipe clean with a mild soapy solution.Wipe dry with a clean cloth.Light stains can be removed with textile cleaner or a sponge damped in water or a mild soapy solution.For maximum quality, re-tighten the screws when necessary.Removable coverMachine wash, max 40°C, normal process.Do not bleach.Do not tumble dry.Iron, max 150°C.Professional dry cleaning in tetrachloroethene and hydrocarbons, normal process.Environment and materialsTableTable top:Particleboard, Clear acrylic lacquer, Fibreboard, Paper foil, Beech veneer, Stain, Clear lacquerTableUnder frame/ Leg:Solid wood, Adhesive, Stain, Clear acrylic lacquerChair coverBack fabric/ Lining:100 % polyester (100% recycled)Chair coverCover/ Fabric:65% polyester (min. 90% recycled), 35% cottonChair frameLeg:Solid wood, Stain, Clear acrylic lacquerChair frameSeat frame:Steel, Epoxy coatingChair frameBackrest frame:SteelChair frameSupport panel:Polyethylene plasticChair frameBackrest cushion/ Seat cushion:100% polyesterChair frameLining/ Smoulder resistant lining:Polyester wadding
- Item #Assembly instructions705.875.30NÄSINGE table504.862.02BERGMUND chair cover604.001.37BERGMUND chair frameItem #Related documents705.875.30NÄSINGE table
NÄSINGE / BERGMUND
table and 4 chairs, dark brown stained beech veener/Orrsta light grey black, 120 cm
- A bit screwdriver is required to assemble this table, sold separately as a part of TRIXIG 15-piece toolset.
There are 0 Click &Collect stores near the current address, which can be selected at the time of checkout
After selecting a store, you'll be able to check its stock and the item's shelf location.
